husqvarna 272 chainsaw

husqvarna 272 chainsaw in Little Italy

husqvarna 272 chainsaw Little Italy

husqvarna 272 chainsaw Little Italy.I bought a 2001 husquarvna wr125 and it was sucking oil from the crankcase.
I thought it must be the crank seal so i took it apart and the crank nut was loose.
I rode it a couple of times and the oil level is droping again.
I assume the crank nut is loose again and am going to take apart again this weekend.
Any sugestions on how to fix would be greatly appreciated.
It needs to be properly torqued using a torque wrench.
Even then it might not remain torqued properly if the threads have been stretched due to over torquing at some point in time in the past.
You really need an owners manual or swing by a bike shop that has certified mechanics to give you proper torque requirements for your bike.
I had a ktm that had a similar problem and i ended up getting a new nut along with red loctite.
I kept close eye every so many hours on the hourmeter.
Husqvarna 372 xp chainsaw impulse line repair and start
Ï»¿ it needs to be right torsion applying a torque wrench.
Flush so it might not persist torqued properly if the threads have been stretched due to over torquing at some point in time in the past.
Ï»¿ flush so it might not persist torqued properly if the threads have been stretched due to over torquing at some point in time in the past.. husqvarna 272 chainsaw

Husqvarna 272 chainsaw (4:00:12)
6,198 views
"revving up the beast"